Every tyre carries its date of birth on the sidewall: four small digits at the end of the DOT code. More customers in Pakistan now know where to look, and a buyer who finds a tyre made three years ago on your rack will usually tell you so, in front of everyone else at the counter.
This guide explains how to read the code, what tyre makers say about age, and how a tyre shop can make sure the oldest stock leaves first.
Where the date is and how to read it
Look on the sidewall for a code that starts with DOT, followed by letters and numbers. The first part identifies the factory and the tyre. The last four digits are the date it was made:
| Last four digits | Means |
|---|---|
| 0124 | 1st week of 2024 (early January) |
| 2325 | 23rd week of 2025 (early June) |
| 5225 | 52nd week of 2025 (late December) |
The first two digits are the week, the last two the year. Tyres made before 2000 used only three digits, so if you ever find one of those in a godown, it is well past selling. The full code is often printed on one sidewall only, so check both sides before you decide a tyre has no date.
How old is too old?
There is no single number that applies to every tyre, and you should be wary of anyone who gives one with total confidence. What tyre makers commonly advise is that tyres in use should be inspected every year once they are five years old, and replaced by ten years from the manufacturing date regardless of how much tread is left. Some carmakers set a shorter limit, often six years.
For a shop, the more practical question is how old a "new" tyre can be when you sell it before a customer objects. Customers increasingly expect tyres made within roughly the last year or two. Whatever your own limit, the point is to choose one, so old stock is a decision rather than a surprise.
Heat, sun and storage
Rubber ages faster in heat and sunlight, and a Pakistani summer is hard on tyres sitting outside a shop. Good storage slows that down:
- Keep stock indoors, out of direct sunlight and away from the road-facing display in the afternoon
- Keep tyres away from heat sources, generators and electric motors
- Store them clean and dry, off a wet floor
- Use the display rack for fast-moving sizes only, and keep the rest inside
Make the oldest batch leave first
Most old stock is not bought old. It becomes old because the newest delivery goes on the front of the rack and the earlier batch sits behind it. Four habits fix that:
- Record the DOT when stock arrives. Size, brand, pattern and the week and year of each batch, on the purchase entry.
- Label the rack. A small tag with the DOT year on each stack, so the karigar can see which to pull.
- Oldest first, every time. New deliveries go behind or below the existing batch of the same size.
- A monthly age check. List every batch older than your limit and decide: discount it, move it to a branch where that size sells, or return it if your supplier allows.
Older tyres with plenty of shelf life left are still good stock. Selling them honestly, with the date on the bill and a fair price, keeps a customer's trust far better than hoping they do not look.
Put the DOT on the invoice
Writing the DOT week and year of the fitted tyres on the invoice does two jobs. It answers the customer's question before they ask it, and it gives you a record if a warranty claim comes back later. If the invoice also records the vehicle and mileage, it becomes the start of that customer's tyre history, which is what makes a rotation reminder six months later possible.
Tracking stock by size, brand and batch, and recording the tyres fitted to each vehicle, is part of OilShop POS tyre shop software. See it in a free demo, or check the plans. For the rest of the stock picture, read why tyre shop stock is so hard to count, and for the work done after the tyre is fitted, how to bill alignment, balancing and puncture repair.
Questions about tyre DOT codes and tyre age
How do I read the manufacturing date on a tyre?
Find the code starting with DOT on the sidewall. The last four digits are the manufacturing date: the first two are the week and the last two are the year. 2325 means the 23rd week of 2025. Tyres made before 2000 used three digits. The full code is usually printed on one side only, so check both sidewalls.
How old can a new tyre be when it is sold?
There is no single age limit that applies to every tyre. Many tyre makers advise having tyres inspected every year once they are five years old and replacing them by ten years from the manufacturing date whatever the tread, and some carmakers say six years. A shop that sells its oldest stock first and avoids letting tyres sit for years will rarely face the question.
Does heat in Pakistan make tyres age faster?
Heat and sunlight speed up the ageing of rubber, which is why tyres should be stored indoors, out of direct sun and away from heat sources. Summer temperatures above 40°C make good storage more important for a tyre shop in Pakistan, not less.
How can a tyre shop sell its oldest stock first?
Record the DOT week and year of every batch when it arrives, label the rack with it, and always pull the oldest batch of a size first. Once a month, list every batch older than your own limit, for example two years, and price those to move or return them to the supplier if your terms allow.